Mag Drill Press, Heavy-Duty Magnetic Drill Press for Large Holemaking, 4" Capacity

This heavy-duty magnetic drill press is engineered for maximum capacity, deep stroke, and high torque for structural steel, plant maintenance, bridge work, and heavy fabrication. With four speed ranges, threading capability, and the highest magnetic holding force in the lineup, it is built for demanding professional use.

Highlights

• Drills annular cutters from 1/2 inch to 4 inch and twist drills from 1/16 inch to 1-1/4 inch
• Countersinking capacity from 3/8 inch to 4-1/8 inch
• Four-speed gearbox for controlling torque and surface finish on large holes
• 5,512 lbs magnetic holding force for maximum stability and accuracy
• Capable of threading operations in addition to drilling and countersinking

Technical Specs (MGD100)
Annular cutters: 1/2 in – 4 in
Twist drills: 1/16 in – 1-1/4 in
Threading: yes
Countersinking: 3/8 in – 4-1/8 in
Length × Width × Height: 13-3/8 in × 12-3/16 in × 20-1/16 in – 27-15/16 in
Stroke: 10-1/4 in
Weight: 61.7 lbs
Magnetic footprint (L×W×H): 8-11/16 in × 4-5/16 in × 2-1/2 in
Magnetic force: 5,512 lbs
Motor power: 16.4 A
Total power draw: 17.7 A
Speed (no load): 40–110 rpm, 140–380 rpm, 65–180 rpm, 220–610 rpm (four ranges)
Speed (loaded): 85 rpm, 270 rpm, 152 rpm, 480 rpm
Spindle: MT3 / 3/4 in
Power supply: 110–120 V AC 60 Hz