Taper Length Drill Bit Chart
Use this taper length drill bit chart to find the decimal diameter, flute length, and overall length of fractional and numbered (wire gauge) taper length drills. Taper length drills are longer than standard jobber length drills, providing additional reach for drilling applications that require extended tool length.
Taper length drill bits are available in High Speed Steel (HSS) and Cobalt options. Choose the drill material and size based on the workpiece and application.
How to Use the Taper Length Drill Bit Chart
- Drill size: The nominal diameter, shown as a fractional inch or numbered (wire gauge) size.
- Decimal equivalent: The drill diameter expressed in decimal inches.
- Flute length: The length of the fluted portion of the drill bit.
- Overall length: The full length of the drill bit, from tip to shank end.
Find your drill size in the appropriate chart and read across for its dimensions. All measurements shown are in inches.
Fractional Taper Length Drill Dimensions
| Drill Size | Decimal (in) | Flute (in) | Overall (in) | Drill Size | Decimal (in) | Flute (in) | Overall (in) |
|---|---|---|---|---|---|---|---|
| 1/64" | 0.0156 | 5/16" | 1-1/2" | 35/64" | 0.5469 | 4-7/8" | 8-1/4" |
| 1/32" | 0.0312 | 3/4" | 2" | 9/16" | 0.5625 | 4-7/8" | 8-1/4" |
| 3/64" | 0.0469 | 1-1/8" | 2-1/4" | 37/64" | 0.5781 | 4-7/8" | 8-3/4" |
| 1/16" | 0.0625 | 1-3/4" | 3" | 19/32" | 0.5938 | 4-7/8" | 8-3/4" |
| 5/64" | 0.0781 | 2" | 3-3/4" | 39/64" | 0.6094 | 4-7/8" | 8-3/4" |
| 3/32" | 0.0938 | 2-1/4" | 4-1/4" | 5/8" | 0.625 | 4-7/8" | 8-3/4" |
| 7/64" | 0.1094 | 2-1/2" | 4-5/8" | 41/64" | 0.6406 | 5-1/8" | 9" |
| 1/8" | 0.125 | 2-3/4" | 5-1/8" | 21/32" | 0.6562 | 5-3/8" | 9" |
| 9/64" | 0.1406 | 3" | 5-3/8" | 43/64" | 0.6719 | 5-3/8" | 9-1/4" |
| 5/32" | 0.1562 | 3" | 5-3/8" | 11/16" | 0.6875 | 5-3/8" | 9-1/4" |
| 11/64" | 0.1719 | 3-3/8" | 5-3/4" | 45/64" | 0.7031 | 5-5/8" | 9-1/2" |
| 3/16" | 0.1875 | 3-3/8" | 5-3/4" | 23/32" | 0.7188 | 5-5/8" | 9-1/2" |
| 13/64" | 0.2031 | 3-5/8" | 6" | 47/64" | 0.7344 | 5-7/8" | 9-3/4" |
| 7/32" | 0.2188 | 3-5/8" | 6" | 3/4" | 0.75 | 5-7/8" | 9-3/4" |
| 15/64" | 0.2344 | 3-3/4" | 6-1/8" | 49/64" | 0.7656 | 6" | 9-7/8" |
| 1/4" | 0.25 | 3-3/4" | 6-1/8" | 25/32" | 0.7812 | 6" | 9-7/8" |
| 17/64" | 0.2656 | 3-7/8" | 6-1/4" | 51/64" | 0.7969 | 6-1/8" | 10" |
| 9/32" | 0.2812 | 3-7/8" | 6-1/4" | 13/16" | 0.8125 | 6-1/8" | 10" |
| 19/64" | 0.2969 | 4" | 6-3/8" | 53/64" | 0.8281 | 6-1/8" | 10" |
| 5/16" | 0.3125 | 4" | 6-3/8" | 27/32" | 0.8438 | 6-1/8" | 10" |
| 21/64" | 0.3281 | 4-1/8" | 6-1/2" | 55/64" | 0.8594 | 6-1/8" | 10" |
| 11/32" | 0.3438 | 4-1/8" | 6-1/2" | 7/8" | 0.875 | 6-1/8" | 10" |
| 23/64" | 0.3594 | 4-1/4" | 6-3/4" | 57/64" | 0.8906 | 6-1/8" | 10" |
| 3/8" | 0.375 | 4-1/4" | 6-3/4" | 29/32" | 0.9062 | 6-1/8" | 10" |
| 25/64" | 0.3906 | 4-3/8" | 7" | 59/64" | 0.9219 | 6-1/8" | 10-3/4" |
| 13/32" | 0.4062 | 4-3/8" | 7" | 15/16" | 0.9375 | 6-1/8" | 10-3/4" |
| 27/64" | 0.4219 | 4-5/8" | 7-1/4" | 61/64" | 0.9531 | 6-3/8" | 11" |
| 7/16" | 0.4375 | 4-5/8" | 7-1/4" | 31/32" | 0.9688 | 6-3/8" | 11" |
| 29/64" | 0.4531 | 4-3/4" | 7-1/2" | 63/64" | 0.9844 | 6-3/8" | 11" |
| 15/32" | 0.4688 | 4-3/4" | 7-1/2" | 1" | 1 | 6-3/8" | 11" |
| 31/64" | 0.4844 | 4-3/4" | 7-3/4" | 1-1/8" | 1.125 | 7-1/8" | 11-3/4" |
| 1/2" | 0.5 | 4-3/4" | 7-3/4" | 1-1/4" | 1.25 | 7-7/8" | 12-1/2" |
| 33/64" | 0.5156 | 4-3/4" | 8" | 1-3/8" | 1.375 | 8-7/8" | 14-1/2" |
| 17/32" | 0.5312 | 4-3/4" | 8" | 1-1/2" | 1.5 | 9-3/8" | 15" |
Number / Wire Gauge Taper Length Drill Dimensions
| Drill Size | Decimal (in) | Flute (in) | Overall (in) | Drill Size | Decimal (in) | Flute (in) | Overall (in) |
|---|---|---|---|---|---|---|---|
| 1 | 0.228 | 3-3/4" | 6-1/8" | 41 | 0.096 | 2-1/2" | 4-5/8" |
| 2 | 0.221 | 3-5/8" | 6" | 42 | 0.0935 | 2-1/4" | 4-1/4" |
| 3 | 0.213 | 3-5/8" | 6" | 43 | 0.089 | 2-1/4" | 4-1/4" |
| 4 | 0.209 | 3-5/8" | 6" | 44 | 0.086 | 2-1/4" | 4-1/4" |
| 5 | 0.2055 | 3-5/8" | 6" | 45 | 0.082 | 2-1/4" | 4-1/4" |
| 6 | 0.204 | 3-5/8" | 6" | 46 | 0.081 | 2-1/4" | 4-1/4" |
| 7 | 0.201 | 3-5/8" | 6" | 47 | 0.0785 | 2-1/4" | 4-1/4" |
| 8 | 0.199 | 3-5/8" | 6" | 48 | 0.076 | 2" | 3-3/4" |
| 9 | 0.196 | 3-5/8" | 6" | 49 | 0.073 | 2" | 3-3/4" |
| 10 | 0.1935 | 3-5/8" | 6" | 50 | 0.07 | 2" | 3-3/4" |
| 11 | 0.191 | 3-5/8" | 6" | 51 | 0.067 | 2" | 3-3/4" |
| 12 | 0.189 | 3-5/8" | 6" | 52 | 0.0635 | 2" | 3-3/4" |
| 13 | 0.185 | 3-3/8" | 5-3/4" | 53 | 0.0595 | 1-3/4" | 3" |
| 14 | 0.182 | 3-3/8" | 5-3/4" | 54 | 0.055 | 1-3/4" | 3" |
| 15 | 0.18 | 3-3/8" | 5-3/4" | 55 | 0.052 | 1-3/4" | 3" |
| 16 | 0.177 | 3-3/8" | 5-3/4" | 56 | 0.0465 | 1-1/8" | 2-1/4" |
| 17 | 0.173 | 3-3/8" | 5-3/4" | 57 | 0.043 | 1-1/8" | 2-1/4" |
| 18 | 0.1695 | 3-3/8" | 5-3/4" | 58 | 0.042 | 1-1/8" | 2-1/4" |
| 19 | 0.166 | 3-3/8" | 5-3/4" | 59 | 0.041 | 1-1/8" | 2-1/4" |
| 20 | 0.161 | 3-3/8" | 5-3/4" | 60 | 0.04 | 1-1/8" | 2-1/4" |
| 21 | 0.159 | 3-3/8" | 5-3/4" | 61 | 0.039 | 1-1/8" | 2-1/4" |
| 22 | 0.157 | 3-3/8" | 5-3/4" | 62 | 0.038 | 3/4" | 2" |
| 23 | 0.154 | 3" | 5-3/8" | 63 | 0.037 | 3/4" | 2" |
| 24 | 0.152 | 3" | 5-3/8" | 64 | 0.036 | 3/4" | 2" |
| 25 | 0.1495 | 3" | 5-3/8" | 65 | 0.035 | 3/4" | 2" |
| 26 | 0.147 | 3" | 5-3/8" | 66 | 0.033 | 3/4" | 2" |
| 27 | 0.144 | 3" | 5-3/8" | 67 | 0.032 | 3/4" | 2" |
| 28 | 0.1405 | 3" | 5-3/8" | 68 | 0.031 | 3/4" | 2" |
| 29 | 0.136 | 3" | 5-3/8" | 69 | 0.0292 | 3/4" | 2" |
| 30 | 0.1285 | 3" | 5-3/8" | 70 | 0.028 | 3/4" | 2" |
| 31 | 0.12 | 2-3/4" | 5-1/8" | 71 | 0.026 | 3/4" | 2" |
| 32 | 0.116 | 2-3/4" | 5-1/8" | 72 | 0.025 | 5/16" | 1-1/2" |
| 33 | 0.113 | 2-3/4" | 5-1/8" | 73 | 0.024 | 5/16" | 1-1/2" |
| 34 | 0.111 | 2-3/4" | 5-1/8" | 74 | 0.0225 | 5/16" | 1-1/2" |
| 35 | 0.11 | 2-3/4" | 5-1/8" | 75 | 0.021 | 5/16" | 1-1/2" |
| 36 | 0.1065 | 2-1/2" | 4-5/8" | 76 | 0.02 | 5/16" | 1-1/2" |
| 37 | 0.104 | 2-1/2" | 4-5/8" | 77 | 0.018 | 5/16" | 1-1/2" |
| 38 | 0.1015 | 2-1/2" | 4-5/8" | 78 | 0.016 | 5/16" | 1-1/2" |
| 39 | 0.0995 | 2-1/2" | 4-5/8" | 79 | 0.0145 | 5/16" | 1-1/2" |
| 40 | 0.098 | 2-1/2" | 4-5/8" | 80 | 0.0135 | 5/16" | 1-1/2" |
Frequently Asked Questions About Taper Length Drill Bits
What is a taper length drill bit?
A taper length drill bit is a longer-than-jobber twist drill designed for applications requiring additional reach. The term describes the drill length series, not necessarily a tapered shank.
How do taper length drills compare with jobber length drills?
For a comparable diameter, taper length drills generally have longer flutes and greater overall length than jobber length drills. Jobber drills are shorter and may offer greater rigidity when the extra reach is not needed.
Are taper length drills the same as taper shank drills?
No. Taper length describes the drill length, while taper shank describes the shank style. Taper length drills can have straight shanks, so check the product specification.
When should I choose HSS versus cobalt taper length drills?
High Speed Steel (HSS) is a versatile option for general-purpose drilling. Cobalt offers improved hot hardness and is commonly used for tougher materials, including stainless steel. Use appropriate speeds, feeds, and cutting fluid for the application.
How do I find the flute length and overall length of a taper length drill?
Locate the fractional or numbered drill size in the chart and read across to the flute and overall length columns. Check the specific product listing when exact clearance or reach is critical.