Drill Bit Size Conversion Chart

Use this drill bit size conversion chart to compare fractional, decimal, metric, number, and letter drill bit diameters. Whether you are selecting a drill bit for metalworking, machining, or general drilling, the chart helps you identify standard sizes and compare their nominal diameters.

Not every drill size has an exact equivalent in another sizing system. When a precise hole diameter is required, check the dimensions and tolerances for your application before substituting a nearby size.

Understanding Drill Bit Size Types

  • Fractional drill bits: Sized in fractions of an inch, such as 1/8", 1/4", and 1/2".
  • Decimal inches: A common way to compare drill diameters, such as 0.1250" or 0.2500".
  • Number drill bits: Standard sizes #80 through #1. Higher numbers indicate smaller diameters.
  • Letter drill bits: Standard sizes A through Z, generally increasing in diameter alphabetically.
  • Metric drill bits: Sized in millimeters, such as 3 mm, 6 mm, and 10 mm.

How to Use the Drill Size Conversion Chart

Find your drill size in the first column, then read across to see its size type, decimal-inch diameter, and millimeter equivalent. The chart is sorted by nominal diameter, making it easier to compare nearby sizes. For example, both a 1/4-inch drill and a letter E drill have a nominal diameter of 0.2500 inches (6.35 mm).

Drill Size Conversion Reference Table

Includes number drills #80–#1, letter drills A–Z, fractional sizes from 1/64 to 1 inch, and metric sizes from 0.5 to 25 mm in 0.5 mm increments. Decimal values are rounded for display.

Drill Size Decimal (in) Metric (mm) Drill Size Decimal (in) Metric (mm) Drill Size Decimal (in) Metric (mm)
#80 0.0135 0.343 5/32 in 0.1562 3.969 X 0.3970 10.084
#79 0.0145 0.368 #22 0.1570 3.988 Y 0.4040 10.262
1/64 in 0.0156 0.397 4 mm 0.1575 4.000 13/32 in 0.4062 10.319
#78 0.0160 0.406 #21 0.1590 4.039 Z 0.4130 10.490
#77 0.0180 0.457 #20 0.1610 4.089 10.5 mm 0.4134 10.500
0.5 mm 0.0197 0.500 #19 0.1660 4.216 27/64 in 0.4219 10.716
#76 0.0200 0.508 #18 0.1695 4.305 11 mm 0.4331 11.000
#75 0.0210 0.533 11/64 in 0.1719 4.366 7/16 in 0.4375 11.112
#74 0.0225 0.571 #17 0.1730 4.394 11.5 mm 0.4528 11.500
#73 0.0240 0.610 #16 0.1770 4.496 29/64 in 0.4531 11.509
#72 0.0250 0.635 4.5 mm 0.1772 4.500 15/32 in 0.4688 11.906
#71 0.0260 0.660 #15 0.1800 4.572 12 mm 0.4724 12.000
#70 0.0280 0.711 #14 0.1820 4.623 31/64 in 0.4844 12.303
#69 0.0292 0.742 #13 0.1850 4.699 12.5 mm 0.4921 12.500
#68 0.0310 0.787 3/16 in 0.1875 4.762 1/2 in 0.5000 12.700
1/32 in 0.0312 0.794 #12 0.1890 4.801 13 mm 0.5118 13.000
#67 0.0320 0.813 #11 0.1910 4.851 33/64 in 0.5156 13.097
#66 0.0330 0.838 #10 0.1935 4.915 17/32 in 0.5312 13.494
#65 0.0350 0.889 #9 0.1960 4.978 13.5 mm 0.5315 13.500
#64 0.0360 0.914 5 mm 0.1969 5.000 35/64 in 0.5469 13.891
#63 0.0370 0.940 #8 0.1990 5.055 14 mm 0.5512 14.000
#62 0.0380 0.965 #7 0.2010 5.105 9/16 in 0.5625 14.287
#61 0.0390 0.991 13/64 in 0.2031 5.159 14.5 mm 0.5709 14.500
1 mm 0.0394 1.000 #6 0.2040 5.182 37/64 in 0.5781 14.684
#60 0.0400 1.016 #5 0.2055 5.220 15 mm 0.5906 15.000
#59 0.0410 1.041 #4 0.2090 5.309 19/32 in 0.5938 15.081
#58 0.0420 1.067 #3 0.2130 5.410 39/64 in 0.6094 15.478
#57 0.0430 1.092 5.5 mm 0.2165 5.500 15.5 mm 0.6102 15.500
#56 0.0465 1.181 7/32 in 0.2188 5.556 5/8 in 0.6250 15.875
3/64 in 0.0469 1.191 #2 0.2210 5.613 16 mm 0.6299 16.000
#55 0.0520 1.321 #1 0.2280 5.791 41/64 in 0.6406 16.272
#54 0.0550 1.397 A 0.2340 5.944 16.5 mm 0.6496 16.500
1.5 mm 0.0591 1.500 15/64 in 0.2344 5.953 21/32 in 0.6562 16.669
#53 0.0595 1.511 6 mm 0.2362 6.000 17 mm 0.6693 17.000
1/16 in 0.0625 1.587 B 0.2380 6.045 43/64 in 0.6719 17.066
#52 0.0635 1.613 C 0.2420 6.147 11/16 in 0.6875 17.462
#51 0.0670 1.702 D 0.2460 6.248 17.5 mm 0.6890 17.500
#50 0.0700 1.778 1/4 in 0.2500 6.350 45/64 in 0.7031 17.859
#49 0.0730 1.854 E 0.2500 6.350 18 mm 0.7087 18.000
#48 0.0760 1.930 6.5 mm 0.2559 6.500 23/32 in 0.7188 18.256
5/64 in 0.0781 1.984 F 0.2570 6.528 18.5 mm 0.7283 18.500
#47 0.0785 1.994 G 0.2610 6.629 47/64 in 0.7344 18.653
2 mm 0.0787 2.000 17/64 in 0.2656 6.747 19 mm 0.7480 19.000
#46 0.0810 2.057 H 0.2660 6.756 3/4 in 0.7500 19.050
#45 0.0820 2.083 I 0.2720 6.909 49/64 in 0.7656 19.447
#44 0.0860 2.184 7 mm 0.2756 7.000 19.5 mm 0.7677 19.500
#43 0.0890 2.261 J 0.2770 7.036 25/32 in 0.7812 19.844
#42 0.0935 2.375 K 0.2810 7.137 20 mm 0.7874 20.000
3/32 in 0.0938 2.381 9/32 in 0.2812 7.144 51/64 in 0.7969 20.241
#41 0.0960 2.438 L 0.2900 7.366 20.5 mm 0.8071 20.500
#40 0.0980 2.489 M 0.2950 7.493 13/16 in 0.8125 20.637
2.5 mm 0.0984 2.500 7.5 mm 0.2953 7.500 21 mm 0.8268 21.000
#39 0.0995 2.527 19/64 in 0.2969 7.541 53/64 in 0.8281 21.034
#38 0.1015 2.578 N 0.3020 7.671 27/32 in 0.8438 21.431
#37 0.1040 2.642 5/16 in 0.3125 7.938 21.5 mm 0.8465 21.500
#36 0.1065 2.705 8 mm 0.3150 8.000 55/64 in 0.8594 21.828
7/64 in 0.1094 2.778 O 0.3160 8.026 22 mm 0.8661 22.000
#35 0.1100 2.794 P 0.3230 8.204 7/8 in 0.8750 22.225
#34 0.1110 2.819 21/64 in 0.3281 8.334 22.5 mm 0.8858 22.500
#33 0.1130 2.870 Q 0.3320 8.433 57/64 in 0.8906 22.622
#32 0.1160 2.946 8.5 mm 0.3346 8.500 23 mm 0.9055 23.000
3 mm 0.1181 3.000 R 0.3390 8.611 29/32 in 0.9062 23.019
#31 0.1200 3.048 11/32 in 0.3438 8.731 59/64 in 0.9219 23.416
1/8 in 0.1250 3.175 S 0.3480 8.839 23.5 mm 0.9252 23.500
#30 0.1285 3.264 9 mm 0.3543 9.000 15/16 in 0.9375 23.812
#29 0.1360 3.454 T 0.3580 9.093 24 mm 0.9449 24.000
3.5 mm 0.1378 3.500 23/64 in 0.3594 9.128 61/64 in 0.9531 24.209
#28 0.1405 3.569 U 0.3680 9.347 24.5 mm 0.9646 24.500
9/64 in 0.1406 3.572 9.5 mm 0.3740 9.500 31/32 in 0.9688 24.606
#27 0.1440 3.658 3/8 in 0.3750 9.525 25 mm 0.9843 25.000
#26 0.1470 3.734 V 0.3770 9.576 63/64 in 0.9844 25.003
#25 0.1495 3.797 W 0.3860 9.804 1 in 1.0000 25.400
#24 0.1520 3.861 25/64 in 0.3906 9.922
#23 0.1540 3.912 10 mm 0.3937 10.000

Conversion: 1 inch = 25.4 mm exactly. This table shows nominal diameters; it is not a substitute for a tap-drill chart or machining tolerance specification.

Frequently Asked Questions

How do I convert drill bit sizes between metric and fractional inches?

To convert millimeters to inches, divide by 25.4. To convert inches to millimeters, multiply by 25.4. For example, a 6 mm drill bit measures approximately 0.2362 inches, while a 1/4-inch drill bit measures exactly 6.35 mm. Use the chart above to compare standard drill sizes.

What is the difference between numbered and letter drill bit sizes?

Numbered drill bits range from #80 (0.0135 inches) to #1 (0.2280 inches), with smaller numbers indicating larger diameters. Letter drill bits range from A (0.2340 inches) to Z (0.4130 inches), with diameters increasing alphabetically. These systems provide additional diameter choices beyond common fractional sizes.

Are metric and fractional drill bit sizes interchangeable?

Some metric and fractional drill bit sizes are close in diameter, but they are not always interchangeable. For example, a 6.5 mm drill bit measures approximately 0.2559 inches, compared with 0.2500 inches for a 1/4-inch drill bit. Always check the required hole diameter and tolerance before substituting sizes.

How do I find the closest standard drill bit size?

Locate the required diameter in decimal inches or millimeters, then compare it with the available sizes in the chart. The nearest listed size may be suitable for general drilling, but precision holes and threaded applications may require a specific diameter.

Why are drill bits available in fractional, metric, number, and letter sizes?

Different drill sizing systems developed to accommodate various measurement standards and manufacturing requirements. Fractional sizes are common in general-purpose drilling, metric sizes are widely used internationally, and number and letter sizes provide additional diameter choices frequently used in machining and tapping applications.

Related Drill Bit Resources