Tin-Coated Jobber Drills

Tin-Coated Jobber Drills

TiN Coated HSS Jobber Drill Bits for Longer Tool Life

Shop titanium nitride (TiN) coated jobber drill bits from Qualtech, designed to improve wear resistance, reduce friction, and extend cutting tool life in demanding drilling applications. These high-speed steel drill bits feature a distinctive gold-colored TiN coating that provides a hard, wear-resistant surface over the HSS cutting tool.

Our TiN coated HSS jobber drills feature a 118° conventional drill point, two-flute twist design, round shank, and standard jobber length. They are designed for general-purpose and production drilling in steel, cast iron, and other suitable machinable materials, including more demanding metalworking applications when proper cutting conditions are maintained.

Available in fractional and wire gauge sizes, these drills offer a practical upgrade from conventional uncoated HSS when improved tool life and cutting efficiency are priorities.

Shop TiN Coated Jobber Drills by Size

Find the correct titanium nitride coated drill diameter for your machining, fabrication, or maintenance application.

Fractional TiN Coated Jobber Drills

Fractional TiN coated drill bits are available in standard inch-based diameters for general-purpose drilling, production machining, and fabrication work.

These drills are a convenient choice when drawings and hole requirements specify common fractional inch sizes.

Shop Fractional TiN Coated Jobber Drills

Wire Gauge TiN Coated Jobber Drills

Wire gauge TiN coated drill bits are identified by numbered sizes and provide a range of smaller and intermediate drill diameters.

These sizes are useful for precision holemaking, tap drill applications, and production drilling where a specific numbered diameter is required.

Shop Wire Gauge TiN Coated Jobber Drills

What Is a Titanium Nitride (TiN) Coated Drill Bit?

A TiN coated drill bit is a cutting tool with a thin layer of titanium nitride applied to its surface. Titanium nitride is a hard ceramic coating that helps protect the cutting edges from abrasive wear and reduces friction during drilling.

Unlike conventional bright-finish or black oxide drill bits, TiN coated drills feature a hard coating that can improve cutting performance and extend tool life when used under suitable conditions.

Hard, Wear-Resistant Surface

The titanium nitride coating provides greater surface hardness than uncoated HSS, helping the cutting edges resist abrasive wear during repetitive drilling operations.

Reduced Friction During Drilling

TiN coating can reduce friction between the drill and workpiece material. This may improve cutting efficiency, reduce heat generation, and help chips move through the drill flutes.

Improved Tool Life

Under appropriate machining conditions, TiN coated HSS drills can provide longer cutting tool life than comparable uncoated HSS drills. This makes them particularly attractive for production environments where drill replacement and downtime affect productivity.

Distinctive Gold Finish

TiN coated drill bits are commonly recognized by their gold-colored finish. This color comes from the titanium nitride coating and should not be confused with decorative gold-colored surface treatments or black-and-gold drill finishes.

Qualtech TiN Coated Jobber Drill Features

High-Speed Steel Construction

These drills are manufactured from high-speed steel (HSS), providing a useful balance of toughness, hardness, and general-purpose drilling performance. The TiN coating adds surface wear resistance without changing the underlying HSS material.

118° Conventional Drill Point

The 118° conventional point is designed for general-purpose drilling in suitable materials. For accurate hole placement on hard or uneven surfaces, a center punch or spot drill may help reduce walking.

Two-Flute Twist Design

The two-flute design provides cutting edges and channels for chip evacuation. Proper chip removal helps maintain cutting performance and reduces the risk of excessive heat or drill breakage.

Round Shank and Jobber Length

The round shank is compatible with suitable drill chucks and precision toolholding systems. Standard jobber length provides a practical balance between drilling reach and rigidity for general machining applications.

Right-Hand Cutting Direction

These drills are designed to cut with normal clockwise spindle rotation, making them suitable for conventional drilling equipment and standard machining operations.

Best Applications for TiN Coated HSS Drill Bits

Steel and General Metalworking

TiN coated HSS jobber drills are suitable for drilling many machinable steels when proper speeds, feeds, and cutting fluid are used. The wear-resistant coating can provide an advantage over uncoated HSS during repetitive drilling.

Cast Iron

Cast iron can be abrasive to cutting tools. TiN coating helps resist cutting-edge wear, making these drills useful for suitable cast iron machining applications.

Stainless Steel and Difficult Materials

Qualtech TiN coated drills are marketed for difficult-to-drill metals, including work-hardened stainless steel. However, performance depends on the specific alloy, hardness, machine rigidity, and cutting conditions.

For frequent stainless steel drilling, a cobalt or specialized carbide drill may be preferable, particularly when higher hot hardness is required.

Shop Cobalt Jobber Drills

Production Drilling

TiN coated drills are especially useful in production environments where consistent drilling performance, reduced tool wear, and longer intervals between tool changes can improve efficiency.

Fabrication and Maintenance

These drills are also useful for fabrication shops, industrial maintenance, repair operations, and other general-purpose drilling applications where a wear-resistant HSS drill is preferred.

TiN Coated vs. Polished vs. Black Oxide vs. Cobalt Drill Bits

Different drill materials and finishes provide different performance advantages. Choosing the right drill depends on the workpiece material, cutting conditions, and required tool life.

TiN Coated HSS Drill Bits

Best for: General metalworking and production drilling where increased wear resistance and longer tool life are priorities.

The hard titanium nitride coating helps protect the HSS cutting edges and reduce friction under suitable conditions.

Polished HSS Jobber Drills

Best for: Economical general-purpose drilling, maintenance, and suitable nonferrous materials.

Polished drills feature a smooth, bright, uncoated finish and offer dependable HSS performance without the additional cost of a hard coating.

Shop Polished HSS Jobber Drills

Black Oxide HSS Jobber Drills

Best for: General-purpose drilling where improved corrosion resistance and lubricant retention are desired.

Black oxide is a surface treatment rather than a hard ceramic coating. It does not provide the same surface hardness as titanium nitride.

Shop Black Oxide Jobber Drills

Cobalt Jobber Drills

Best for: Stainless steel, alloy steels, and more demanding metal drilling applications.

Cobalt is alloyed into the HSS material itself, improving hot hardness throughout the tool. TiN, by comparison, is a surface coating applied over the drill material.

Shop Cobalt Jobber Drills

Quick recommendation: Choose TiN coated HSS for improved surface wear resistance, polished HSS for economical everyday drilling, black oxide for general-purpose surface-treated drills, and cobalt for demanding metals where greater heat resistance is needed.

How to Get the Best Performance from TiN Coated Drills

Use Proper Cutting Speeds and Feeds

Although TiN coating can improve wear resistance, it does not eliminate the need for correct cutting parameters. Match spindle speed and feed pressure to the drill diameter, workpiece material, and machine setup.

Use Cutting Fluid When Appropriate

Suitable cutting fluid helps control heat and friction when drilling steel and other metals. Follow the recommendations for the specific material and machining operation.

Maintain Proper Chip Evacuation

Clear chips as needed, especially when drilling deeper holes. Chip packing can increase cutting forces and heat, reducing drill life even when a hard coating is present.

Protect the Coated Cutting Edges

Avoid excessive force, vibration, and improper toolholding. TiN improves surface wear resistance, but the underlying HSS cutting tool can still chip, wear, or break under unsuitable conditions.

Understand What Happens After Resharpening

When a TiN coated drill is resharpened, the coating is removed from the newly ground cutting surfaces unless the tool is recoated. The drill can still cut, but it may no longer provide the same coated-edge wear resistance as a new drill.

Frequently Asked Questions About TiN Coated Drill Bits

What does TiN mean on a drill bit?

TiN stands for titanium nitride, a hard, gold-colored ceramic coating applied to cutting tools to improve surface wear resistance and reduce friction.

Are TiN coated drill bits better than regular HSS?

TiN coated HSS drills can offer improved wear resistance and longer tool life compared with similar uncoated HSS drills under appropriate cutting conditions. However, the best choice depends on the material and application.

Can TiN coated drill bits cut steel?

Yes. These TiN coated HSS jobber drills are suitable for many machinable steels when proper speeds, feeds, and cutting fluid are used.

Can titanium nitride drill bits cut stainless steel?

They can be used for suitable stainless steel applications, but results depend on the alloy and cutting conditions. For frequent or difficult stainless steel drilling, cobalt or specialized carbide drills may offer better performance.

Are TiN coated drill bits made of titanium?

No. These Qualtech drills are manufactured from high-speed steel with a thin titanium nitride coating. They are not made from solid titanium.

Is TiN coating the same as black oxide?

No. TiN is a hard ceramic coating designed to improve wear resistance. Black oxide is a surface treatment primarily associated with corrosion resistance and lubricant retention.

Can TiN coated drill bits be sharpened?

Yes. HSS drill bits can generally be resharpened using suitable grinding equipment. However, sharpening removes the TiN coating from the newly ground cutting surfaces unless the drill is recoated.

What sizes are available?

Our Qualtech TiN coated jobber drill bits are available in fractional and wire gauge sizes.

Shop Fractional | Shop Wire Gauge

Shop Qualtech TiN Coated Jobber Drill Bits

Browse our selection of titanium nitride coated HSS jobber drills for general metalworking, production drilling, fabrication, and maintenance applications. Choose the size that fits your drilling requirements.

Shop Fractional TiN Coated Jobber Drills

Shop Wire Gauge TiN Coated Jobber Drills