HSS A/C Extension

HSS A/C Extension

 

Find the Right HSS Aircraft Extension Drill Bit

When standard-length drill bits cannot reach the workpiece, high-speed steel (HSS) aircraft extension drills provide the extra reach needed for drilling in recessed, obstructed, and difficult-to-access locations. These extra-long drill bits are commonly used in aerospace maintenance, automotive repair, metal fabrication, manufacturing, and industrial equipment maintenance.

DrillsandCutters.com offers HSS aircraft extension drill bits in 6" and 12" overall lengths, with fractional, letter, and numbered wire gauge sizes available for a wide range of drilling requirements.

Manufactured from high-speed steel, these drills provide a practical combination of toughness, versatility, and affordability. Many feature a black oxide surface treatment and 135° split-point geometry to help improve drilling performance.

Whether you're drilling mild steel, aluminum, brass, or other suitable machinable materials, our HSS aircraft extension drills offer an economical solution when additional reach is required.

Featured: 5-Piece HSS Aircraft Extension Drill Set – 6" OAL

Looking for a convenient assortment of extended-reach drill bits? The Qualtech five-piece HSS aircraft extension drill set includes five popular fractional sizes, each with a 6" overall length.

Manufactured from high-speed steel with a black oxide finish, these drills are designed for general-purpose metal drilling in mild steel, aluminum, brass, and other suitable materials.

The set includes 1/4", 5/16", 3/8", 7/16", and 1/2" drill bits. Each features a 135° split point designed to help reduce walking and starting thrust.

With a 2-3/4" flute length and 6" overall length, these drills provide additional reach for recessed drilling locations while maintaining a convenient cutting section.

The five drills are supplied in a plastic storage pouch, making this an excellent assortment for fabrication shops, maintenance departments, contractors, and automotive repair.

Shop Featured HSS Aircraft Drill Set »

What Are HSS Aircraft Extension Drill Bits?

HSS aircraft extension drills are twist drills with extended overall lengths designed to access drilling locations that are difficult or impossible to reach with standard jobber length drills.

Despite their name, aircraft extension drills are not limited to aerospace applications. They are commonly used throughout manufacturing, fabrication, maintenance, and mechanical repair.

Extended Reach for Difficult Locations

The main advantage of an aircraft extension drill is its ability to reach beyond brackets, housings, assemblies, and other obstructions.

These drills allow operators to reach a workpiece without necessarily disassembling surrounding equipment.

High-Speed Steel Construction

High-speed steel is a widely used cutting tool material that offers a useful balance of toughness, cutting hardness, and affordability.

HSS aircraft extension drills are suitable for general-purpose drilling in mild steel, aluminum, brass, copper, plastics, and other compatible materials.

Extended Shank with a Fluted Cutting Section

Aircraft extension drills commonly feature an extended shank with a shorter fluted cutting section near the tip.

This configuration provides additional reach without requiring flutes along the entire drill length.

Always confirm both overall length and flute length when selecting a drill.

6" vs. 12" HSS Aircraft Extension Drills

Our HSS aircraft extension drills are offered in 6" and 12" overall lengths. Choosing the correct length is important for reaching the workpiece while maintaining as much drilling rigidity as possible.

6" HSS Aircraft Extension Drills

Six-inch aircraft extension drills provide additional reach beyond many standard jobber length drills.

They are a practical choice for reaching recessed components, drilling behind brackets, and working around obstructions where standard drills are too short.

Compared with a similar 12" drill, a 6" aircraft drill generally provides greater rigidity because less unsupported length extends from the toolholder.

Best for: Moderate extended reach, automotive repair, fabrication, equipment maintenance, and general-purpose drilling.

12" HSS Aircraft Extension Drills

Twelve-inch aircraft extension drills provide significantly greater reach for deeply recessed or obstructed drilling locations.

They are useful for reaching through assemblies, accessing components inside equipment, and drilling where shorter tools cannot reach.

Because of their greater length, 12" aircraft drills require additional attention to alignment, feed pressure, and vibration.

Best for: Deeply recessed locations, machinery maintenance, obstructed work areas, and applications requiring maximum reach.

Which Length Should You Choose?

Choose a 6" drill whenever it provides sufficient reach. Use a 12" drill when the drilling location cannot be accessed with a shorter tool.

Using the shortest suitable drill helps minimize deflection and improve drilling control.

Fractional, Letter and Wire Gauge HSS Aircraft Drill Sizes

HSS aircraft extension drills are available in several sizing systems to accommodate different drilling and manufacturing requirements.

Fractional HSS Aircraft Extension Drills

Fractional drill bits use inch-based sizes such as 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2".

These are commonly used in general metalworking, fabrication, automotive repair, and industrial maintenance.

Fractional HSS aircraft drills are available in 6" and 12" overall lengths.

Letter Size HSS Aircraft Extension Drills

Letter drill sizes use designations from A through Z and provide specific diameters that are useful in machining and manufacturing.

Letter sizes often fall between common fractional drill diameters and can be useful when a particular hole size is required for tapping, fasteners, or precision work.

Use a drill size conversion chart to identify the decimal equivalent of each letter size.

Wire Gauge HSS Aircraft Extension Drills

Numbered wire gauge drills use designations such as #1, #10, #30, and #60.

These sizes are frequently used for small-diameter holes, precision machining, fastener preparation, and manufacturing applications.

In the standard numbered drill system, higher numbers generally represent smaller diameters.

Wire gauge HSS aircraft drills provide additional size options when common fractional sizes do not match the required hole diameter.

Choosing the Correct Size

Always confirm the required cutting diameter before ordering.

For letter and wire gauge sizes, decimal equivalents are especially useful when matching engineering drawings, tapping requirements, or replacement drill specifications.

Black Oxide HSS Aircraft Extension Drill Bits

Many of our HSS aircraft extension drills feature a black oxide surface treatment designed to provide practical benefits during metal drilling.

Corrosion Resistance

Black oxide provides a degree of corrosion resistance compared with an untreated steel surface.

Proper cleaning and storage remain important to prevent rust and preserve cutting tool performance.

Cutting Fluid Retention

The black oxide surface can help retain cutting fluid, assisting lubrication during suitable metalworking applications.

Proper lubrication helps reduce heat and friction during drilling.

General-Purpose Metalworking

Black oxide HSS aircraft extension drills are a practical choice for drilling mild steel and other suitable machinable materials.

The finish complements the toughness and versatility of high-speed steel without requiring a premium cobalt alloy.

135° Split Point and 118° Conventional Point HSS Aircraft Drills

Point geometry affects how a drill starts cutting, the thrust required, and its tendency to walk on the workpiece surface.

135° Split-Point Aircraft Drills

Many HSS aircraft extension drills feature 135° split-point geometry.

The split point is designed to reduce walking and starting thrust, which can be particularly useful when drilling in difficult-to-access locations.

Our featured five-piece HSS aircraft drill set features 135° split points on all five drills.

118° Conventional-Point Aircraft Drills

Some smaller aircraft extension drill sizes use conventional 118° point geometry.

This traditional point style is suitable for many general-purpose drilling applications.

Center punching or spot drilling may help improve starting accuracy when using conventional-point drills on smooth metal surfaces.

Check the Individual Drill Specifications

Point geometry can vary by diameter and product series.

Always review the individual drill listing to confirm the point style rather than assuming every size uses the same geometry.

Overall Length vs. Flute Length: What Is the Difference?

When selecting an aircraft extension drill, it is important to understand the difference between overall length and flute length.

Overall Length (OAL)

Overall length is the total length of the drill bit, measured from the cutting tip to the end of the shank.

Our aircraft extension drills are offered in 6" and 12" overall lengths.

This measurement is primarily used to determine whether the drill can reach the intended drilling location.

Flute Length

Flute length is the length of the grooved cutting section of the drill.

Flutes help form the cutting edges and provide a path for chips to exit the hole.

The flute length is typically much shorter than the overall length of an aircraft extension drill.

Aircraft Extension Drills Are Designed for Reach

An aircraft extension drill is often used to reach a distant workpiece rather than to drill a hole equal to its full overall length.

If your application requires a particularly deep hole, verify the flute length and consider whether an extra-long flute drill is more appropriate.

When Should You Choose HSS Instead of Cobalt?

HSS and cobalt aircraft extension drills are designed for many of the same general applications, but they differ in material composition, heat resistance, and cost.

Choose HSS for General-Purpose Drilling

HSS is often the most economical choice for drilling mild steel, aluminum, brass, copper, plastics, and other suitable machinable materials.

It offers a useful balance of toughness and cutting performance for everyday maintenance, repair, and fabrication work.

Choose Cobalt for Tougher Metals

M35 cobalt aircraft extension drills contain approximately 5% cobalt and offer improved hot hardness compared with conventional HSS.

They are often preferred for stainless steel, alloy steels, and other demanding materials where greater heat resistance is beneficial.

Is Cobalt Always Better?

Not necessarily. For many general-purpose applications, HSS provides sufficient performance at a lower cost.

Cobalt becomes more attractive when the workpiece material or cutting conditions justify its additional heat resistance.

Explore Cobalt Aircraft Extension Drills

Common Applications for HSS Aircraft Extension Drill Bits

Aerospace and Aircraft Maintenance

Accessing recessed components, drilling around obstructions, and working in areas where standard-length drills cannot reach.

Automotive and Mechanical Repair

Drilling behind brackets, inside assemblies, and in difficult-to-access locations around mechanical components.

Industrial Maintenance

Equipment repairs, machinery modifications, and maintenance work requiring additional drill reach.

Metal Fabrication

Drilling mild steel, aluminum, and other suitable materials in recessed or obstructed work areas.

Manufacturing and Assembly

Reaching specific drilling locations within assemblies and production equipment where shorter drills are unsuitable.

How to Choose the Right HSS Aircraft Extension Drill

1. Determine the Required Overall Length

Choose 6" when it provides sufficient reach. Select 12" for more deeply recessed or obstructed drilling locations.

2. Confirm the Cutting Diameter

Select the appropriate fractional, letter, or wire gauge size for your application.

3. Check the Flute Length

Verify that the fluted section is long enough for the intended drilling depth and chip clearance requirements.

4. Review the Point Geometry

Many HSS aircraft extension drills feature 135° split points, but certain sizes may use conventional 118° points.

5. Confirm the Workpiece Material

HSS is suitable for many general-purpose drilling applications. For stainless steel and tougher alloys, consider whether cobalt would provide better performance.

Tips for Using HSS Aircraft Extension Drill Bits

Use the Shortest Suitable Drill

A 6" drill will generally provide greater rigidity than a comparable 12" drill. Use only the length required to reach the workpiece.

Maintain Proper Alignment

Extended-length drills are more susceptible to bending and deflection. Keep the drill aligned with the intended hole and avoid unnecessary side pressure.

Use Appropriate Cutting Speeds

Select spindle speed based on the drill diameter and workpiece material. Avoid excessive speed or feed pressure that could cause overheating or breakage.

Use Cutting Fluid When Appropriate

Suitable cutting fluid can help reduce heat and friction, improve cutting performance, and extend drill life during metalworking.

Secure the Workpiece

Proper workholding reduces movement and vibration during drilling, especially when using longer cutting tools.

Clear Chips Regularly

Aircraft extension drills often have shorter flutes than their overall length. Clear chips as needed to prevent packing, overheating, and premature drill failure.

Frequently Asked Questions About HSS Aircraft Extension Drills

What is an HSS aircraft extension drill?

It is an extended-length twist drill manufactured from high-speed steel, designed to reach drilling locations that cannot be accessed with shorter drills.

What lengths are HSS aircraft extension drills available in?

Our HSS aircraft extension drills are offered in 6" and 12" overall lengths.

What materials can HSS aircraft drills cut?

HSS aircraft drills are suitable for mild steel, aluminum, brass, copper, plastics, and other compatible machinable materials when appropriate cutting conditions are used.

What is the difference between 6" and 12" aircraft drills?

Six-inch drills provide moderate extended reach with greater rigidity. Twelve-inch drills reach farther into recessed or obstructed locations but require additional attention to alignment and deflection.

Are HSS aircraft drills available in fractional sizes?

Yes. Our HSS aircraft extension selection includes fractional drill diameters in 6" and 12" overall lengths.

Are letter and wire gauge sizes available?

Yes. Our HSS aircraft extension drill selection includes fractional, letter, and numbered wire gauge sizes.

What is black oxide on a drill bit?

Black oxide is a surface treatment that provides some corrosion resistance and can assist with cutting-fluid retention during metal drilling.

Do HSS aircraft drills have 135° split points?

Many do, but certain diameters use conventional 118° points. Check the individual product specifications.

Does a 12" aircraft drill have 12" of cutting flutes?

No. Twelve inches refers to the overall length. The flute length is shorter and varies by diameter and product configuration.

What is the difference between HSS and cobalt aircraft drills?

HSS offers economical general-purpose performance. Cobalt-alloy HSS provides improved hot hardness and is often preferred for stainless steel and tougher alloys.

Are aircraft extension drills only used for aircraft repair?

No. They are widely used in automotive repair, fabrication, industrial maintenance, manufacturing, and other applications requiring additional reach.

Can I use HSS aircraft drills in a handheld drill?

They can be used in compatible portable drilling equipment when the application is suitable. Extra care is needed to maintain alignment and avoid excessive side loading.

What sizes are included in the featured five-piece set?

The Qualtech set includes 1/4", 5/16", 3/8", 7/16", and 1/2" HSS aircraft extension drills, each with a 6" overall length.

When should I choose an aircraft extension drill instead of a jobber drill?

Choose an aircraft extension drill when a standard jobber drill cannot reach the intended drilling location. Use a shorter jobber drill when additional reach is unnecessary.

Shop HSS Aircraft Extension Drill Bits

Explore our selection of high-speed steel aircraft extension drills in 6" and 12" overall lengths. Choose fractional, letter, and wire gauge sizes for fabrication, maintenance, manufacturing, automotive repair, and other extended-reach drilling applications.

Browse All HSS Aircraft Extension Drills

6" HSS Fractional Aircraft Extension Drills

6" HSS Wire Gauge Aircraft Extension Drills

12" HSS Wire Gauge Aircraft Extension Drills

Featured 5-Piece 6" HSS Aircraft Extension Drill Set

5-Piece 12" HSS Aircraft Extension Drill Set

Need a different cutting tool material or drill length?

Cobalt Aircraft Extension Drills

All Aircraft Extension Drills

Standard Jobber Length Drill Bits

Watch Drill America HSS Black Oxide Drill Bits in Action

Learn more about the features and performance of Drill America black oxide high-speed steel drill bits, including their surface treatment, cutting performance, and versatility for general-purpose drilling applications.

Drill America HSS Black Oxide Drill Bits

Discover the benefits of high-speed steel drill bits with a black oxide surface treatment, including their versatility for everyday drilling and industrial metalworking.

Learn why black oxide HSS drills are a practical choice for mild steel, aluminum, fabrication, equipment maintenance, and general-purpose drilling applications.

Our HSS aircraft extension drills are available in 6" and 12" overall lengths, providing additional reach for drilling in recessed and difficult-to-access locations.

Shop HSS Aircraft Extension Drill Bits