Qualtech

#4-1/2" Carbon Steel Tap and Die Set with Hex Dies Sizes: #4-40, #6-32, #8-32, #10-24, #10-32, #12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13,...

#4-1/2" Carbon Steel Tap and Die Set with Round Dies Sizes: #4-40, #6-32, #8-32, #10-24, #10-32, #12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13,...

3.00mm - 12.00mm Carbon Steel Tap and Die Set with Hex Die Sizes: m3 x .5, m3 x .6,4 x .7, m4 x .75, m5 x .8, m5 x .9, m6 x .75, m6 x 1.00, m7 x .75, m7 x 1.00, m8 x 1.00, m8 x 1.25, m10 x 1.25,...

3.00mm - 12.00mm Carbon Steel Tap and Die Set with Round Dies Sizes: m3 x .5, m3 x .6,4 x .7, m4 x .75, m5 x .8, m5 x .9, m6 x .75, m6 x 1.00, m7 x .75, m7 x 1.00, m8 x 1.00, m8 x 1.25, m10 x 1...

3.00mm - 12.00mm HSS Tap and Die Set with Hex Dies Sizes: m3 x .5, m3 x .6,4 x .7, m4 x .75, m5 x .8, m5 x .9, m6 x .75, m6 x 1.00, m7 x .75, m7 x 1.00, m8 x 1.00, m8 x 1.25, m10 x 1.25, m10 x 1...

#4-1/2" High Speed Steel Tap and Die Set with Round Die Sizes: #4-40, #6-32, #8-32, #10-24, #10-32, #12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13,...

3.00mm - 12.00mm  High Speed Steel Tap and Die Set with Round Die Sizes: m3 x .5, m3 x .6,4 x .7, m4 x .75, m5 x .8, m5 x .9, m6 x .75, m6 x 1.00, m7 x .75, m7 x 1.00, m8 x 1.00, m8 x...

6.00mm -24.00mm Carbon Steel NC and NF Tap and Die Set Sizes: m6 x 1, m6 x 0.75, m8 x 1, m8 x 1.25, m10 x 1.25, m10 x 1.5, m12 x 1.5, m12 x 1.75, m14 x 1.5, m14 x 2, m16 x 1.5, m16 x 2, m18 x 1.5,...

1/4-1" Carbon Steel NC and NF Tap and Die Set Sizes: 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10,...

#4-40 HSS Combined Drill Bit & Tap (Drap) Designed to drill and tap in one operation Can be used on multi-spindle or hand held operations Round shank for use in a wide range of tool holding...

#6-32 HSS Combined Drill Bit & Tap (Drap) Designed to drill and tap in one operation Can be used on multi-spindle or hand held operations Round shank for use in a wide range of tool...

#8-32 HSS Combined Drill Bit & Tap (Drap) Designed to drill and tap in one operation Can be used on multi-spindle or hand held operations Round shank for use in a wide range of tool holding...